Sipura SPA-2000
Automatic Configuration Instructions
Step 1: Plug in the ATA
Connect a telephone handset, network, and power to the ATA, and wait briefly while it
discovers its IP address via DHCP. For more information on connecting your ATA, or to set a
Static IP Address manually, please consult your User Manual.
Step 2: Verify & Configure your IP Address
First we need to verify that your SPA-2000 will acquire an IP Address
automatically if your network supports DHCP.
If your network uses a DHCP Server to assign IP Addresses to network devices, or if you are
connecting the SPA-2000 to a home router such as a Linksys or Netgear router or a modem
that supports DHCP/NAT, please do the following:
1. Pick up the phone connected to Phone 1 and dial ****. You will hear a voice prompt
saying "Sipura configuration menu: please enter option followed by the pound key, or
hangup to exit”.
2. Dial 101# to enter the DHCP configuration voice menu.
3. Dial 1# to enable DHCP, then dial 1 to save your configuration settings.
4. Hang up the phone and wait 2 minutes.
Manually Assigning a Static IP Address
Members using static IP on their home network may wish to configure the adaptor
with static IP. If you have obtained a static IP from your Internet service provider (ISP)
and wish to configure your adaptor with your static IP settings, please follow the
instructions below:
1. You will first have to obtain the following information:
• IP Address • Default Gateway • Subnet Mask
If you are using a router, please contact your router manufacturer for
instructions for retrieving this information from the router directly. If you are
not using a router, please obtain the above information from your ISP.
2. Pick up the phone connected to Phone 1 and dial ****. You will hear a voice
prompt saying "Sipura configuration menu: please enter option followed by
the pound key, or hangup to exit".
3. Dial 101# to access the Static IP configuration menu.
4. Dial 0# to disable DHCP, then dial 1 to save the setting.
5. Dial 111# to access the IP Address Menu. Enter the SPA-2000's IP Address
followed by # (using * to represent “.” eg. 123*45*67*89# to represent the IP
address 123.45.67.89). Press 1 to save the setting.
6. Dial 121# to access the Subnet Mask Menu. Enter the SPA-2000's Subnet
Mask followed by # (using * to represent “.” eg. 255*255*255*0# to represent
the mask 255.255.255.0). Dial 1 to save the setting.
7. Dial 131# to access the Default Gateway IP Address Menu. Enter the Internet
Gateway's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the
setting.
8. Dial 161# to access the DNS Server IP Address Menu. Enter the Primary
DNS Server's IP Address followed by # (using * to represent “.” eg.
123*45*67*1# to represent the IP address 123.45.67.1). Dial 1 to save the
setting.
9. Hang up the phone.
You have now completed the static IP configuration.
To verify the configuration was correct, pick up the phone connected to Phone 1 and
dial ****. You will hear a voice prompt saying "Sipura configuration menu: please
enter option followed by the pound key, or hangup to exit".
Dial 110# to hear the SPA-2000's current IP address. If this is not the same as what
you entered in, please repeat steps 1 through 9 to ensure that the settings are
correct.
Step 3: Configure the SPA-2000 to connect to the Firefly Network
1. Open your configuration page. To do so, type the following into your web browser:
( "xxx.xxx.xxx.xxx" represents the IP address of your SPA-2000)
2. Click on the Provisioning menu
3. In the text box marked Profile Rule enter one of the following addresses, based on
your location. If you have configured a local dialing prefix for your account via the
Freshtel website, use one of the Local Prefix addresses; otherwise, use one of
the other addresses. Each of these configuration files has been modified to provide
the correct settings for your local country.
(NOTE the underscores in “sipura_spa-2000” and “initial_xx” – to be sure, copy and
paste the appropriate line into the Profile Rule field instead of typing it).
Local Prefix
USA:
UK:
No Local Prefix
USA:
UK:
4. Click on the Submit All Changes button and close your web browser.
Step 4: Updating to the latest firmware and configuring your
Firefly number and password
1. Once the ATA has applied the changes, browse to the following address to instruct
the ATA to upgrade its firmware. Eg, for an IP address of xxx.xxx.xxx.xxx:
(NOTE the underscore in “sipura_spa-2000” – to be sure, copy and paste the above
line into your browser)
2. You can now enter your Firefly details into the Line 1 (and optionally Line 2)
configuration areas. Enter your Display Name, User ID (this is your Firefly number)
and Password.
3. Click on the Submit All Changes button.
Your Sipura SPA-2000 is now fully configured and ready to use on the Firefly Network! Simply
pick up the handset and dial.
Dialling:
To dial a Firefly number or voicemail, prefix the number with a star, e.g. *80001234, *123.
If you have configured a local dialling prefix for your account via the Freshtel website, you
can dial local, national, mobile, and international PSTN numbers exactly as you would from a
land line phone in your area; e.g. 08007654321 (US), 9557745 (US – local), 0061399156415
(UK – international), 99156415 (Australia – local).
If you have not configured a local dialling prefix, numbers are dialled in full (including country
code but without any international dial prefix), e.g. 61399156415, 18007654321. Land lines
and mobiles in Australia can be dialled with an initial 0, e.g. 0399156415.
|